TM 9-2320-365-34-2
5-3. ENGINE FAN CLUTCH REPAIR (P/N 1090-08000-01) (CONT)
(4) Install rear spring cap (5.1), spring (6), and front spring
cap (7) on shaft (3).
(5) Install lining (8) in clutch housing (2).
(6) Position shaft mount (4) in clutch housing (2) with holes
aligned.
(7) Attach two C-clamps on clutch housing (2).
WARNING
Tighten C-clamps slowly and evenly to
apply tension.
Failure to comply may
result in injury to personnel or damage to
equipment.
(8) Compress clutch housing (2) and shaft mount (4).
5-6
Change 1
