TM 9-2320-365-34-2
6-3. STARTING MOTOR REPAIR (P/N M0017730MD) (CONT)
(16) Install preformed packing (28) on pin (29).
(17) Position washer (30) in shift housing (25).
(18) Install lever (21) and drive (20) in shift housing (25) with
pin (29), washer (31), and screw (32).
(19) Install bushing (33) in nose housing (34).
(20) Install oil wick (35) and plug (36) in nose housing (34).
(21) Install preformed packing (37) on nose housing (34).
(22) Position washer (38) on shift housing (25).
(23) Position nose housing (34) on shift housing (25) with
matchmarks aligned.
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(24) Apply sealing compound to threads for five screws (39).
(25) Position five screws (39) in nose housing (34).
(26) Tighten five screws (39) to 13-17 lb-ft (18-23 N·m).
6-24
