TM 9-2320-365-34-2
(48) Position washer (53) and electrical lead (54) on starting
motor terminal (55) with washer (56), lockwasher (57),
and two nuts (58).
(49) Tighten two nuts (58) to 33-37 lb-ft (45-50 N·m).
(50) Position electrical lead (54) on starting motor solenoid
terminal (59) with lockwasher (60) and nut (61).
(51) Tighten nut (61) to 43-47 lb-in. (5 N·m).
d. Follow-on Maintenance
Perform starter adjustments and test (TM 9-2920-242-35).
End of Task.
Change 1
6-27
