TM 9-2320-365-34-2
7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT)
(20) Measure thickness (A) of stator thrust plate (14),
minimum thickness 0.505 in. (12.83 mm).
d. Assembly.
NOTE
Perform steps (1) through (3) if replacing a
six splined converter pump with a two splined
converter pump.
(1) Replace cycloidal gear PN 23049376 and gear bushing
PN 6881926 with cycloidal gear PN 29514537 and gear
bushing PN 29514538 (para 21-3).
(2) Replace pump housing PN 29502322 with pump housing
PN 29514801, ball PN 145651, spring PN 29507709,
and pin PN 29516030 (para 21-3).
(3) Replace drive hub PN 29503970 and gear PN 29511395
with drive hub PN 29514799 and gear PN 29511395
(para 21-5).
(4) Install thrust pump washer (1) in converter pump (2).
7-10
