TM 9-2320-365-34-2
7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT)
(14) Remove turbine (7) from converter pump (3).
(15) Remove stator/cam (15) from turbine (7).
(16) Remove stator thrust bearing (16) from stator/cam (15).
(17) Remove thrust pump bearing (17) from stator/cam (15).
(18) Remove converter shim(s) (18) from stator/cam (15).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
(19) Remove retaining ring (19) from stator/cam (15).
(20) Remove stator thrust plate (20) from stator/cam (15).
(21) Remove stator race (21) from stator/cam (15).
(22) Remove 13 flat springs (22) and stator rollers (23) from
stator/cam (15). Discard flat springs.
7-6
