TM 9-2320-365-34-2
7-3. TRANSMISSION UNPACKING/PACKING (CONT)
(3) Position three front mounting brackets (3) on
transmission (4) with six screws (5), washers (6),
lockwashers (7), and nuts (8).
(4) Position two rear mounting brackets (9) on
transmission (4) with eight screws (10) and
lockwashers (11).
WARNING
Transmission weighs approximately
1300 lbs (590 kgs). Attach a suitable
lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
(5) Lift transmission (4) from pallet.
(6) Place transmission (4) on stowage container base
(12).
(7) Position six screws (13), lockwashers (14), and nuts
(15) in three front mounting brackets (3).
(8) Position eight screws (16), lockwashers (17), and nuts
(18) in two rear mounting brackets (9).
7-22
