TM 9-2320-365-34-2
(9) Tighten six nuts (7 and 15) on front brackets (3) to 31-
37 lb-ft (42-50 N·m).
(10) Tighten eight screws (10) on rear mounting brackets
(9) to 31-37 lb-ft (42-50 N·m).
(11) Tighten eight nuts (18) on rear mounting brackets (9)
to 31-37 lb-ft (42-50 N·m).
(12) Remove five bolts (1) and transmission lifting bracket
from adapter housing module (2).
(13) Position five bolts (1) in adapter housing module (2).
(14) Tighten five bolts (1) to 42-50 lb-ft (57-68 N·m).
WARNING
Storage container cover weighs
approximately 130 lbs (59 kgs). Attach a
suitable lifting device prior to
installation. Failure to comply may
result in injury to personnel or damage
to equipment.
(15) Place gasket (19) on stowage container base (12).
(16) Position stowage container cover (20) on stowage
container base (12).
(17) Position 28 screws (21), washers (22), and nuts (23)
on stowage container cover (20).
(18) Tighten 28 nuts (23) to 31-37 lb-ft (42-50 N·m).
(19) Remove lifting device from stowage container cover
(20).
7-23
