TM 9-2320-365-34-2
7-6. TRANSMISSION RESILIENT MOUNT AND BRACKET REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
D%
Transmission assembly removed (para 7-4).
Hydraulic reservoir removed, if equipped (LH side) (TM
9-2320-365-20-4).
Battery box removed (LH side) (TM 9-2320-365-20-3).
Fuel tank removed (RH side) (TM 9-2320-365-20-3).
Spare tire retainer removed (TM 9-2320-365-20-4).
Intake air cleaner removed (TM 9-2320-365-20-3).
RH or LH engine and transmission mount bracket
removed (para 7-17).
Tools and Special Tools
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Tools and Special Tools (Cont)
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Materials/Parts
Bolt (4) (Item 11, Appendix F)
Nut, Self-locking (8) (Item 129, Appendix F)
Bolt (4) (Item 6, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of failing debris. Failure to
comply may result in injury to
personnel.
a. LH Removal.
CAUTION
When removing bolts, continuous removal
of collars is mandatory. Failure to comply
will result in seizing of collar to bolt.
NOTE
• Steps (1) through (8) require the aid of an
assistant.
• Perform steps (1) and (2) on all vehicles not
equipped with hydraulic reservoir.
(1) Remove two collars (1) and bolts (2) from frame rail
(3). Discard collars and bolts.
(2) Remove two collars (4) and bolts (5) from frame rail
(3). Discard collars and bolts.
7-46
Change 1
