TM 9-2320-365-34-2
b. Installation.
(1) Install seal (1) in housing (2).
(2) Install gasket (3) on channel plate (4).
(3) Install strainer (5) on channel plate (4).
NOTE
Perform steps (4) and (5) on serial number
6510032369 and higher.
(4) Position housing (2) on channel plate (4) with three
bolts (6).
(5) Tighten three bolts (6) to 108-120 lb-in. (12-14 N·m).
NOTE
Perform steps (6) and (7) on serial numbers
prior to 6510032369.
(6) Position housing (2) on channel plate (4) with four
bolts (6).
(7) Tighten four bolts (6) to 108-120 lb-in. (12-14 N·m).
c. Follow-On Maintenance.
Install control valve module (para 7-10).
End of Task.
7-93
