TM 9-2320-365-34-2
7-13. TRANSMISSION INTERNAL WIRING HARNESS REPLACEMENT (CONT)
b. Installation.
NOTE
Perform steps (1) through (5) on serial
number 6510032369 and higher.
(1) Position harness (1) on channel plate (2) with two
bolts (3).
(2) Tighten two bolts (3) to 108-120 lb-in. (12-14 N·m).
(3) Connect harness (1) to turbine speed sensor (4).
(4) Connect harness (1) to pressure switch (5).
(5) Connect harness (1) to nine solenoids (6).
NOTE
Perform steps (6) through (10) on serial
numbers prior to 6510032369.
(6) Position harness (1) on channel plate (2) with two bolts
(3).
(7) Tighten two bolts (3) to 108-120 lb-in. (12-14 N·m).
(8) Connect harness (1) to turbine speed sensor (4).
(9) Connect harness (1) to pressure switch (5).
(10) Connect harness (1) to nine solenoids (6).
7-90
Change 1