TM 9-2320-365-34-2
9-2. FRONT AXLE ASSEMBLY REPLACEMENT (CONT)
(12) Remove self-locking nut (16), screw (17), and clamp (18)
from bracket (19). Discard self-locking nut.
(13) Perform steps (7) through (12) on left side of front axle
assembly.
(14) Remove cotter pin (20), nut (21), and draglink (22) from
pivoting arm (23). Discard cotter pin.
(15) Remove four screws (24) and two bearing cups (25)
from drive yoke (26). Discard screws.
(16) Slide drive shaft (27) from side to side and separate
universal joint (28) from drive yoke (26).
(16.1) Attach drive shaft (27) to crossmember (28.1).
9-4
Change 1
