TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
11-2. AIR COMPRESSOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Power steering pump removed (TM 9-2320-365-20-3).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Pan, Drain (Item 36, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Vise, Machinist (Item 72, Appendix B)
Caps, Vise Jaw (Item 9, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
Antifreeze (Item 12, Appendix C)
Sealing, Compound (Item 41, Appendix C)
Nut, Self-Locking (Item 145, Appendix F)
Gasket (Item 64, Appendix F)
Sealant (Item 75, Appendix C)
Personnel Required
(2)
a. Removal.
(1) Remove radiator cap (1) from radiator overflow tank (2).
(2) Position drain pan under radiator draincock (3).
(3) Drain approximately 15-20 qt (14-19 L) of coolant from
radiator (4).
(4) Close radiator draincock (3) on radiator (4).
(5) Loosen hose clamp (5) on air hose (6).
(6) Disconnect air hose (6) from 45-degree fitting (7).
(7) Disconnect air hose (8) from 90-degree fitting (9).
(8) Disconnect coolant hose (10) from 90-degree fitting (11).
11-2
Change 1
