TM 9-2320-365-34-2
13-8. REAR BUMPER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rear fenders removed (TM 9-2320-365-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Materials/Parts
Bolt (12) (Item 3, Appendix F)
Nut, Self-locking (12) (Item 134, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
• Step (1) requires the aid of an assistant.
• Left and right side or rear bumper is removed
the same way. Left side shown.
(1) Remove five collars (1) and bolts (2) from rear bumper
(3). Discard collars and bolts.
(2) Perform step (1) on right side of rear bumper.
13-26
