TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
11K Self-recovery winch (SRW) cable removed (TM
9-2320-365-20-4).
Muffler and heat shields removed (TM 9-2320-365-
20-3).
11K Self-recovery winch (SRW) cartridge/
counterbalance valve removed (para 16-3).
11K Self-recovery winch (SRW) hydraulic motor
removed (para 16-4).
Cargo bed removed (para 15-8).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Pan, Drain (Item 36, Appendix B)
Wrench, Torque, 0-250 N·m (Item 82, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Tools and Special Tools (Cont)
Sling, Cargo (2) (Item 48, Appendix B)
Materials/Parts
Rag, Wiping (Item 59, Appendix C)
Oil, Lubricating (Item 44, Appendix C)
Solvent, Dry Cleaning (Item 81, Appendix C)
Nut, Self-locking (8) (Item 134, Appendix F)
Lockwasher (12) (Item 93, Appendix F)
Parts Kit, Seal (Item 221, Appendix F)
Parts Kit, Disc and Spring (Item 219, Appendix F)
Parts Kit, Winch (Item 224, Appendix F)
Spring, Compression (Item 289, Appendix F)
Lockwasher (40) (Item 92, Appendix F)
Pin, Spring (4) (Item 231, Appendix F)
Lockwasher (6) (Item 91, Appendix F)
Personnel Required
(2)
a. Removal.
WARNING
11K Self-recovery winch (SRW) weighs
approximately 130 lbs (59 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
Remove eight self-locking nuts (1), bolts (2), mounting
plates (3 and 4), and 11K SRW (5) from vehicle.
Discard self-locking nuts.
16-2
