TM 9-2320-365-34-2
b. Disassembly.
(1) Remove six screws (1), lockwashers (2), and outer brake
housing (3) from motor end support (4).
Discard
lockwashers.
(2) Remove preformed packing (5) from motor end support
(4). Discard preformed packing.
(3) Remove two dowel pins (6) from motor end support
(4).
(4) Remove brake shaft (7) from outer brake housing (3).
(5) Apply low pressure air to port hole on face of outer brake
housing (3).
(6) Remove brake piston (8) from outer brake housing (3).
(7) Remove 10 friction disc plates (9) and nine brake drive
plates (10) from outer brake housing (3).
(8) Remove two back-up rings (11) and preformed packings
(12) from brake piston (8). Discard back-up rings and
preformed packings.
(9) Remove twelve compression springs (13) from motor
end support (4). Discard compression springs.
(10) Remove spring pin (14) and arm shifter (15) from motor
support end (4). Discard spring pin.
(11) Remove shifter drive gear (16) from motor end support
(4).
16-3
