TM 9-2320-365-34-2
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
(CONT)
(25) Remove primary carrier (40) from ring gear (34).
(26) Remove secondary carrier (41) from ring gear (34).
(27) Remove gear end flange (42) from gear end support
(43).
WARNING
Use care when removing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
(28) Remove two spring pins (44), cable retainer pins (45),
springs (46), and washers (47) from base mounts (19).
Discard spring pins.
16-6
