TM 9-2320-365-34-2
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
(CONT)
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(28) Install ball bearing (43) on primary sun gear (44) with
retaining ring (45).
(29) Install primary sun gear (44) in motor end support (34).
(30) Position motor end support (34) on two base mounts (4)
with eight lockwashers (46) and bolts (47).
(31) Tighten eight bolts (47) to 70-95 lb-ft (95-129 N·m).
(32) Install shifter drive gear (48) in motor end support (34).
(33) Install arm shifter (41) in motor end support (34) with
spring pin (49).
(34) Install 12 compression springs (50) in motor end support
(34).
16-16
