TM 9-2320-365-34-2
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT)
(13) Lubricate secondary carrier (24) and primary carrier (7).
(14) Install secondary carrier (24) in ring gear (13).
(15) Install primary carrier (7) in ring gear (13).
(16) Install two magnetic plugs (25) in motor end flange (26).
(17) Install cable wedge (27) in motor end flange (26).
(18) Install ball bearing (28) in motor end flange (26).
(19) Install shaft seal (29) in motor end flange (26).
(20) Install preformed packing (30) on motor end flange (26).
(21) Position motor end flange (26) on ring gear (13) with 20
lockwashers (31) and screws (32).
(22) Tighten 20 screws (32) to 38-45 lb-ft (52-61 N·m).
16-14
