TM 9-2320-365-34-2
(8) Install preformed packing (16) on gear end support (17).
(9) Position gear end support (17) on two base mounts (4)
with eight lockwashers (18) and screws (19).
(10) Tighten eight screws (19) to 70-95 lb-ft (95-129 N·m).
WARNING
Use care when installing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
(11) Install two washers (20), springs (21), and cable retainer
pins (22) on base mounts (4) with spring pins (23).
(12) Install gear end flange (11) on gear end support (17).
16-13
