• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HIGHWAY EMERGENCY MARKER KIT SETUP
Placing markers on undivided highway with hills

/.5tonv1-2/TM-9-2320-365-10 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
  375    376    377    378    379  380  381    382    383    384    385  
TM 9-2320-365-10 (3)   Remove emergency marker kit (3) from TOOL KIT. (4)   Remove three markers (4) from emergency marker kit (3). (5)   Attach two ends of marker arms (5) with pin (6). (6)   Rotate marker (5) approximately 1/4 turn on base (7). (7)   Perform steps (4) through (6) for second and third markers. b.   Placing markers on undivided, straight highway: (1)   Place  one  marker  (1)  approximately  100  ft  (30  m)  in  front  of  vehicle  with  marker facing approaching traffic. (2)   Place second marker (2) approximately 10 ft (3 m) behind vehicle and about 5 ft (1.5 m) out from side of vehicle with marker facing approaching traffic. (3)   Place third marker (3) approximately 100 ft (30 m) behind vehicle with marker facing approaching traffic. 2-303







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.