• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Placing markers on undivided, straight highway
Placing markers on divided highway or one way road

/.5tonv1-2/TM-9-2320-365-10 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
  376    377    378    379    380  381  382    383    384    385    386  
TM 9-2320-365-10 2-49.   HIGHWAY EMERGENCY MARKER KIT SETUP (CONT) c.   Placing markers on undivided, curved highway: (1)   Place  one  marker  (1)  approximately  100  ft  (30  m)  in  front  of  vehicle  with  marker facing approaching traffic. (2)   Place second marker (2) approximately 10 ft (3 m) behind vehicle and about 5 ft (1.5 m) out from side of vehicle with marker facing approaching traffic. (3)   Place third marker (3) approximately 100 to 500 ft (30 to 150 m) behind vehicle with marker facing approaching traffic and visible before traffic reaches curve. d.   Placing markers on undivided highway with hills: WARNING Vehicle must be secure.   Chock wheels when stopped on incline. Vehicle may roll downhill.   Failure to comply may result in serious injury or death to personnel or damage to equipment. (1)   Place one marker (1) approximately 100 to 500 ft (30 to 150 m) in front of vehicle with marker facing approaching traffic and visible before traffic reaches top of hill. 2-304







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.