TM 9-2320-365-34-2
3-12. ROCKER ARM AND PUSH ROD REPLACEMENT/REPAIR (CONT)
CAUTION
Ensure push rods are seated at top and
bottom.
Failure to comply may result in
damage to equipment.
(4) Position four bolts (6) in rocker arm group (4).
(5) Tighten four bolts (6) to 156-276 lb-in. (18-31 N·m) in
sequence shown.
(6) Perform steps (1), (2), (4), and (5) on remaining five
rocker arm groups.
f. Follow-On Maintenance.
Perform fuel timing checks (para 4-5).
End of Task.
3-94
