TM 9-2320-365-34-2
3-13. CAM ROLLER FOLLOWERS REPLACEMENT (CONT)
e. Installation.
(1) Position two gaskets (1) and front and rear side covers
(2 and 3) on cylinder block (4) with eight washers (5)
and screws (6).
(2) Tighten eight screws (6) to 13-23 lb-ft (18-32 N·m).
NOTE
Perform steps (3) through (5) on center side
cover.
(3) Position gasket (7) and center side cover (8) on cylinder
block (4) with seven washers (9) and screws (10).
(4) Position spacer (11), washer (12), and screw (13) on
cylinder block (4).
(5) Tighten screw (13) and seven screws (10) to 156-276 lb-
in. (18-32 N·m).
(6) Install plug (14) in oil manifold (15).
3-98
