• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FUEL INJECTOR SYNCHRONIZATION - TM-9-2320-365-34-2_186
Fuel Injector Synchronization - TM-9-2320-365-34-2_188

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  142    143    144    145    146  147  148    149    150    151    152  
TM 9-2320-365-34-2 4-3.   FUEL INJECTOR SYNCHRONIZATION (CONT) (4)  Remove three push rods (5) from cylinder head (3). CAUTION Injector spring compressor must be installed on  all  fuel  injectors  that  have  rocker  arms removed.  Failure  to  comply  may  result  in internal damage to fuel injector. (5)  Install injector spring compressor on No. 1 fuel injector (4). (6)  Lightly  tap  injector  spring  compressor  with  a  soft  face hammer. NOTE If injector rack does not move freely, repeat steps (5) and (6). (7)  Check for free movement of injector rack bar (6). NOTE Perform   steps   (3)   through   (7)   on   all   fuel injector(s) to be synchronized. (8)  Remove bolt (7) from inlet manifold (8), nearest to fuel injector to be synchronized. CAUTION Ensure end face of injector rack bar is clean. Failure to comply may result in faulty reading. (9)  Install  the shortest (0.442 in.)  (1.122 cm) dial indicator contact point on dial indicator group. (10)  Install dial indicator group on injector to be synchronized. 4-6







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.