TM 9-2320-365-34-2
13-9. REAR SPRING BRACKETS REPLACEMENT (CONT)
b. Installation.
NOTE
• Left and right side rear spring brackets are
installed the same way. Right side shown.
• Steps (1) through (10) require the aid of an
assistant.
(1) Position rear spring bracket (1) on frame rail (2) with two
bolts (3) and self-locking nuts (4).
(2) Position three bolts (5) and self-locking nuts (6) in rear
spring bracket (1).
(3) Position bolt (7) and self-locking nut (8) in rear spring
bracket (1).
(4) Tighten two self-locking nuts (4), three self-locking nuts
(6) and self-locking nut (8) to 210-225 lb-ft (285-305
N·m).
NOTE
Lubricate pin before installation.
(5) Install leaf spring (9) in rear spring bracket (1) with
spring pin (10).
(6) Install lubrication fitting (11) in spring pin (10).
(7) Position screw (12) and nut (13) in rear spring bracket
(1).
(8) Tighten nut (13) to 76-94 lb-ft (103-127 N·m).
13-30
