TM 9-2320-365-34-2
13-16. FRONT CROSSMEMBER REPLACEMENT (CONT)
NOTE
Left and right side rubber bumpers are
removed the same way. Left side shown.
(6) Remove two screws (10), spacer (11), and rubber
bumper (12) from frame rail (13).
(7) Perform step (6) on right side rubber bumper.
b. Installation.
NOTE
Left and right side rubber bumpers are
installed the same way. Left side shown.
(1) Position spacer (1) and rubber bumper (2) on frame rail
(3) with two screws (4).
(2) Tighten two screws (4) to 34-42 lb-ft (48-57 N·m).
(3) Perform steps (1) and (2) right side rubber bumper.
13-82
