TM 9-2320-365-34-2
WARNING
Front crossmember weighs approximately
200 lbs (91 kgs). Attach a suitable lifting
device prior to installation.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Steps (4) through (11) require the aid of an
assistant.
(4) Position front crossmember (5) on vehicle.
NOTE
Left and right side of front crossmember is
installed the same way. Left side shown.
(5) Position four bolts (6) and self-locking nuts (7) in front
crossmember (5).
(6) Tighten four self-locking nuts (7) to 210-225 lb-ft (285-
305 N·m).
(7) Perform steps (5) and (6) on right side of front
crossmember.
NOTE
Perform steps (8) and (9) on right side of
front crossmember.
(8) Position bracket (8) on front crossmember (5) with two
bolts (9) and self-locking nuts (10).
(9) Tighten two self-locking nuts (10) to 210-225 lb-ft (285-
305 N·m).
13-83
