TM 9-2320-365-34-2
3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
(125) Remove two screws (212), washers (213), and alternator
bracket (214) from support bracket (211).
b. Installation.
NOTE
Perform steps (1) through (6), on removed
engine, on vehicles equipped with 200 Amp
alternator.
(1) Position alternator bracket (1) on support bracket (2) with
two washers (3) and screws (4).
(2) Tighten two screws (4) to 18-22 lb-ft (24-30 N·m).
3-34
Change 1
