(23) Remove cargo sling from cab (24).
Brace cab with cab support tool before
installing pivot arm, spacer, washer, and
cotter pin on tilt cylinder mounting bolt.
Failure to comply may result in serious
injury or death to personnel.
(24) Raise cab enough to install cab support tool on engine
rear lifting eye (33) (TM 9-2320-365-10).
After cab is lowered on cab support tool,
return cab tilt selector knob to the RAISE
position for added safety.
comply may result in injury to personnel.
(25) Lower cab on cab support tool (TM 9-2320-365-10).