TM 9-2320-365-34-2
NOTE
Install plastic cable ties as required.
(36) Route throttle control cable (44) to bracket (45).
(37) Position throttle control cable (44) in bracket (45) with
two nuts (46).
(38) Adjust and tighten nuts (46) to position marked during
removal.
(39) Install throttle control cable (44) on stud (47) with clip
(48).
(40) Connect six pneumatic hoses (49) to three two-way
check valves (50).
(41) Remove cab support tool from engine rear lifting eye
(33).
(42) Lower cab (TM 9-2320-365-10).
15-79
