TM 9-2320-365-34-2
(28) Position six terminal lugs (38) on diode plate (35) with
six lockwashers (39) and screws (40).
(29) Tighten six screws (40) to 30 lb-in. (3 N·m).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep
away from open fire and use in a well-
ventilated area.
If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(30) Apply sealing compound to six screws (40) and terminal
lugs (38).
(31) Position washer (41), lockwasher (42), and screw (43) in
diode plate (35).
(32) Position terminal lugs (44, 45 and 46) on terminal block
(47).
(33) Tighten three screws (48) on terminal block (47) to 30 lb-
in. (3 N·m).
(34) Apply sealing compound to three screws (48) and
terminal lugs (44, 45, and 46).
Change 1
18-23
