TM 9-2320-365-34-2
18-3. 200 AMP ALTERNATOR REPAIR (CONT)
CAUTION
Use care when installing front housing and
shaft on stator. Failure to comply may result
in damage to equipment.
NOTE
• Transfer matchmarks to replacement parts prior
to installation.
• Step (10) requires the aid of an assistant.
(10) Position front housing (15) and shaft (11) on stator (17)
with matchmarks aligned.
(11) Position nine self-locking nuts (18) on stator (17).
(12) Tighten nine self-locking nuts (18) to 45 lb-in. (5 N·m).
NOTE
Transfer matchmarks to replacement parts
prior to installation.
(13) Position rotor (19) on shaft (11) with matchmarks
aligned.
(14) Position six washers (20) and self-locking nuts (21) on
shaft (11).
(15) Tighten six self-locking nuts (21) to 45 lb-in (5 N·m).
18-20
Change 1
