• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CAMSHAFT AND BEARING REPLACEMENT/REPAIR
Cleaning/Inspection - TM-9-2320-365-34-2_981

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  906    907    908    909    910  911  912    913    914    915    916  
TM 9-2320-365-34-2 (2)  Remove two screws (5) from thrust plate (6). CAUTION Use  extreme  care  when removing  camshaft  to prevent damage to camshaft journals and lobes. Failure   to   comply   may   result   in   damage   to equipment. (3)  Remove thrust plate (6) and camshaft (7) from cylinder block (8). NOTE •    Perform steps (4) and (5) if camshaft bearings fail inspection or if camshaft is being replaced. •    Note  location  of  camshaft  bearing  joints  and bearing oil holes during removal. (4)  Remove No. 1 camshaft bearing (9) from cylinder block (8). (5)  Remove six camshaft bearings (10) from cylinder block (8). 20-51







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.