TM 9-2320-365-34-2
21-7. P3 PLANETARY CARRIER MODULE REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission disassembled (para 21-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Caliper, Vernier (Item 8, Appendix B)
Handle, Drive (TM 9-2320-365-20)
Press, Arbor, Hand Operated (Item 41, Appendix B)
Tools and Special Tools (Cont)
Inserter, Bearing and Bushing (TM 9-2320-365-
20)
Pliers, Retaining Ring (Item 37, Appendix B)
Materials/Parts
Rag, Wiping (Item 59, Appendix C)
a. Disassembly.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(1) Remove retaining ring (1) and indexing ring (2) from
planetary carrier (3).
(2) Remove four spindles (4), pinion gears (5), and eight
thrust washers (6) from planetary carrier (2).
(3) Remove eight roller bearings (7) from four pinion gears
(5).
(4) Remove bushing (8) from planetary carrier (2).
21-40
