TM 9-2320-365-34-2
WARNING
Flywheel housing weighs approximately
75 lbs (34 kgs). Attach a suitable lifting
device prior to installation.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Steps (5) through (8) require the aid of an
assistant.
(5) Position flywheel housing (2) on engine (5).
(6) Position bolt (6) in flywheel housing (2).
(7) Position 10 self-locking screws (7) in flywheel housing
(2).
(8) Position two bolts (8) in flywheel housing (2).
(9) Tighten 10 self-locking screws (7) to 98-144 lb-ft (130-
190 N·m).
(10) Tighten two bolts (8) to 33-47 lb-ft (45-65 N·m).
(11) Tighten bolt (6) to 156-276 lb-in. (18-31 N·m).
c. Follow-On Maintenance.
(1) Install oil pan (para 3-16).
(2) Install crankshaft rear seal (para 3-9).
(3) Install flexplate (para 3-10).
(4) Install engine (para 3-3).
(5) Install engine speed sensor (TM 9-2320-365-20-3).
(6) Install starting motor (TM 9-2320-365-20-3).
End of Task.
Change 1
3-88.1/(3-88.2 Blank)
