TM 9-2320-365-34-2
3-15. ENGINE FRONT COVER REPLACEMENT (CONT)
b. Installation.
(1) Position gasket (1) and engine front cover (2) on engine
front housing (3) with two washers (4) and screws (5).
(2) Position 13 screws (6) in engine front cover (2).
(3) Tighten two screws (5) to 74-89 lb-ft (100-120 N·m).
(4) Tighten 13 screws (6) to 15-25 lb-ft (20-34 N·m).
(5) Position bracket (7) on engine front cover (2) with screw
(8).
(6) Tighten screw (8) to 15-25 lb-ft (20-34 N·m).
(7) Position bracket (9) on engine front housing (3) with
screw (10).
(8) Tighten screw (10) to 15-25 lb-ft (20-34 N·m).
3-106
