TM 9-2320-365-34-2
3-16. OIL PAN REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-3220-365-10).
Coolant drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Container (Capacity 25 qt (24 L)
Hammer, Soft Head (Item 28, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Materials/Parts
Packing, Preformed (Item 190, Appendix F)
Gasket (Item 47, Appendix F)
Packing, Preformed (Item 200, Appendix F)
Cap and Plug Set (Item 18, Appendix C)
Lubricating Oil, Engine (Item 45, Appendix C)
Cement, Gasket (Item 35, Appendix C)
Sealing Compound (Item 73, Appendix C)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Position container under drain plug (1).
(2) Remove drain plug (1) from oil pan (2).
(3) Remove preformed packing (3) from drain plug (1).
Discard preformed packing.
3-108
