TM 9-2320-365-34-2
4-9. FUEL GOVERNOR REPLACEMENT/REPAIR (CONT)
WARNING
Use care when removing retaining clips.
Retaining clips are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(19) Remove retaining clip (24) and clevis pin (25) from fuel
governor clevis (26).
(20) Remove preformed packing (27) from adapter sleeve
(22). Discard preformed packing.
(21) Remove three screws (28), washers (29), and fuel
governor (30) from engine (31).
b. Disassembly.
(1) Remove gasket (1) from fuel governor (2). Discard
gasket.
(2) Remove 90-degree fitting (3) from adapter (4).
(3) Remove adapter (4) from fuel governor (2).
(4) Remove preformed packings (5 and 6) from adapter (4).
Discard preformed packings.
(5) Remove check valve (7) from fuel governor (2). Discard
check valve.
(6) Remove 90-degree fitting (8) from fuel governor (2).
(7) Remove preformed packing (9) from 90-degree fitting (8).
Discard preformed packing.
4-40
