TM 9-2320-365-34-2
(14) Disconnect air compressor inlet coolant tube (18) from
90-degree fitting (19).
(15) Remove air compressor inlet coolant tube (18) from 90-
degree fitting (20).
(16) Remove spring clip (21) from adapter sleeve (22).
CAUTION
Ensure dowel on each mounting bracket is
properly positioned and mounting bracket is
flush against cylinder head.
Failure to
comply may result in damage to equipment.
(17) Loosen adapter sleeve (22) on cylinder head (23).
(18) Slide adapter sleeve (22) into cylinder head (23).
4-39
