TM 9-2320-365-34-2
4-9. FUEL GOVERNOR REPLACEMENT/REPAIR (CONT)
c. Assembly.
(1) Install seal (1), pump piston (2), and sleeve (3) in fuel
governor (4).
(2) Install seal (5) and spring (6) in pump piston (2).
CAUTION
Transfer pump cover is under spring pressure.
Pressure must be maintained on cover and
screws tightened evenly. Failure to comply may
result in damage to equipment.
(3) Install transfer pump cover (7) on fuel governor (4) with
three screws (8).
(4) Install preformed packing (9) on fitting (10).
(5) Install fitting (10) in fuel governor (4).
(6) Install preformed packing (11) on fitting (12).
(7) Install fitting (12) in fuel governor (4).
4-42
