TM 9-2320-365-34-2
(3) Install profile gage bolt in torque converter end plug (3).
(4) Remove torque converter end plug (3) from torque
converter module (1).
(5) Remove profile gage bolt from torque converter end plug
(3).
(6) Remove retainer packing (4) from torque converter end
plug (3). Discard retainer packing.
NOTE
Perform steps (6.1) and (6.2) on transmission
serial numbers 6510165560 and higher.
(6.1) Remove torque converter end plug (4.1) from torque
converter module (1).
(6.2) Remove retainer packing (4.2) from torque converter end
plug (4.1). Discard retainer packing.
(7) Remove screw (5) and shim (6) from torque converter
module (1).
Change 1
7-3
