TM 9-2320-365-34-2c. Cleaning/Inspection.WARNING• Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles andgloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and donot breathe vapors. Keep away from heat or flame. Never smoke when using solvent; theflashpoint for Type I Dry Cleaning Solvent is 100° F (38° C) and for Type II is 130° F (50C). Failure to comply may result in serious injury or death to personnel.• If personnel become dizzy while using dry cleaning solvent, immediately get fresh air andmedical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If drycleaning solvent contacts eyes, immediately flush eyes with water and get immediate medicalattention. Failure to comply may result in injury to personnel.(1) Clean all metal parts with dry cleaning solvent.NOTEReplace any part that fails visual inspectionor resistance checks.(2) Inspect connector (1) for continuity, damage, broken ormissing pins, or excessive wear.(3) Inspect control valve body (2) for cracks, pitting, orcorrosion.(4) Inspect solenoid (3) for continuity and resistance;resistance should read 3-5 ohms.(5) Inspect two springs (4) for maximum length of 2.20 in.(56 mm).(6) Inspect speed sensor (5) for continuity and resistance;resistance should read 540-660 ohms.(7) Inspect two valves (6) for cracks, pitting, or corrosion.Change 1 8-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
