TM 9-2320-365-34-2
8-2. TRANSFER CASE CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
d. Assembly.
WARNING
Use care when installing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
(1) Install spring (1) and valve (2) in control valve body (3).
(2) Install preformed packings (4 and 5) on solenoid (6).
(3) Install solenoid (6) in control valve body (3) with retaining
pin (7).
(4) Install valve (8), spring (9), and stop (10) in control valve
body (3).
(5) Install filter element (11) in control valve body (3).
(6) Install retaining pin (12) in control valve body (3).
e. Installation.
(1) Position speed sensor (1) in transfer case module (2)
with two bolts (3).
(2) Tighten two bolts (3) to 84-120 lb-in. (9-14 N m).
(3) Position control valve assembly (4) in transfer case
module (2) with six bolts (5).
(4) Tighten six bolts (5) to 22-30 lb-ft (30-41 N m).
8-6
Change 1
