TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
13-2. M1081 SIDELOAD BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Wrench, Torque, 0-150 lb-ft (Item 78, Appendix B)
Crowfoot Attachment, Socket Wrench (TM 9-2320-
365-20)
Tools and Special Tools (Cont)
Socket Set, Impact (Item 50, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Materials/Parts
Nut, Self-locking (6) (Item 134, Appendix F)
Bolt (Item 4, Appendix F)
Bolt (5) (Item 5, Appendix F)
Nut, Self-locking (Item 148, Appendix F)
Personnel Required
(2)
a. Removal.
NOTE
• Left and right side sideload brackets are
removed the same way. Left side shown.
• Steps (1) through (4) require the aid of an
assistant.
(1) Remove self-locking nut (1) and bolt (2) from sideload
bracket (3). Discard self-locking nut.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(2) Remove three collars (4) and bolts (5) from sideload
bracket (3). Discard collars and bolts.
13-2
