TM 9-2320-365-34-2
13-4. M1081 PARACHUTE SUSPENSION ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance.
INITIAL SETUP
Equipment Conditions
Parachute slide assemblies removed (TM 9-2320-
365-20-3).
Cargo bed removed (para 15-8).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Tools and Special Tools (Cont)
Sling, Cargo (Item 48, Appendix B)
Materials/Parts
Nut, Self-locking (32) (Item 135, Appendix F)
Personnel Required
(2)
a. Removal.
NOTE
Steps (1) through (4) require the aid of an
assistant.
(1) Remove 16 self-locking nuts (1) and bolts (2) from
parachute suspension assembly (3). Discard self-locking
nuts.
(2) Perform step (1) on left side of parachute suspension
assembly.
WARNING
Parachute suspension assembly weighs
approximately 250 lbs (113 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in damage to
equipment or injury to personnel.
(3) Remove lanyard (4) from parachute suspension
assembly (3).
(4) Remove parachute suspension assembly (3) from
vehicle.
13-7
