TM 9-2320-365-34-2
NOTE
Steps (33) and (34) must be performed together.
(33) Turn steering wheel to right until stops are reached and hold for ten seconds.
(34) Check pressure reading on STE/ICE-R. Pressure reading should be between 500-1000 psi (3448-6895 kPa).
(35) Turn wheels straight ahead.
NOTE
If pressure reading is not within range,
bottom adjustment screw is turned to right to
increase pressure or turned to left to
decreases pressure.
(36) Loosen locknut (16) on bottom adjustment screw (19).
(37) Adjust bottom adjustment screw (19) to left or right.
(38) Turn steering wheel to right until stops are reached and
verify pressure is 650-750 psi (4482-5171 kPa).
(39) Turn wheels straight ahead.
CAUTION
Ensure adjustment screw does not turn
when tightening locknut. Failure to comply
may result in damage to equipment.
NOTE
Repeat steps (37) through (38) until pressure
reading of 650-750 psi (4482-5171 kPa) is
obtained.
(40) Tighten locknut (16) on bottom adjustment screw (19) to
22 lb-ft (30 N·m).
(41) Turn steering wheel to left until stops are reached and
hold for ten seconds.
(42) Check pressure reading on STE/ICE-R.
Pressure
reading should be between 500-1000 psi (3448-6895
kPa).
12-13
