TM 9-2320-365-34-2
b. Installation.
NOTE
• Steps (1) through (9) require the aid of an
assistant.
• Left and right side of rear tension beam is
installed the same way. Left side shown.
• Perform steps (1) and (2) on model M1081.
(1) Position rear tension beam (1), load spreader bracket
(2), and taillight mounting bracket (3) on vehicle with two
bolts (4) and self-locking nuts (5).
(2) Tighten two self-locking nuts (5) to 210-225 lb-ft (285-
305 N·m).
NOTE
Perform
steps
(3)
and
(4)
on
model
M1078/M1079.
(3) Position taillight mounting bracket (3) on rear tension
beam (1) with two bolts (6) and self-locking nuts (7).
(4) Tighten two self-locking nuts (7) to 210-225 lb-ft (285-
305 N·m).
(5) Position three bolts (8) and self-locking nuts (9) in rear
tension beam (1).
(6) Tighten three self-locking nuts (9) to 210-225 lb-ft (285-
305 N·m).
(7) Install shackle (10) on rear tension beam (1) with pin
(11).
Change 1
13-11
