TM 9-2320-365-34-2
13-10. M1081 ANGLE BRACKET REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Air dryer removed (LH side) (TM 9-2320-365-20-5).
Muffler and heat shield removed (RH side) (TM 9
2320-365-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Materials/Parts
Nut, Self-locking (6) (Item 134, Appendix F) (LH
side)
Bolt (6) (Item 5, Appendix F) (LH side)
Nut, Self-locking (4) (Item 134, Appendix F) (RH
side)
Bolt (4) (Item 5, Appendix F) (RH side)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. LH Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Step (1) requires the aid of an assistant.
Remove six collars (1), bolts (2), and angle bracket (3)
from frame rail (4). Discard collars and bolts.
13-32
