TM 9-2320-365-34-2
13-11. M1081 FRAME PLATE REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Resilient mount and mechanical stops removed (TM
9-2320-365-20-3).
Parachute suspension assembly removed (para 13-
4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Sling, Cargo (Item 48, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Cap and Plug Set (Item 18, Appendix C)
Nut, Self-locking (2) (Item 126, Appendix F)
Nut, Self-locking (Item 148, Appendix F)
Nut, Self-locking (17) (Item 134, Appendix F) (LH
side)
Nut, Self-locing (16) (Item 134, Appendix F) (RH
side)
Bolt (13) (Item 5, Appendix F) (LH side)
Bolt (12) (Item 5, Appendix F) (RH side)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. LH Removal.
(1) Remove two self-locking nuts (1), bolts (2), and brackets
(3) from frame plate (4). Discard self-locking nuts.
13-35
