TM 9-2320-365-34-2
13-17. INTERMEDIATE CROSSMEMBER REPLACEMENT (CONT)
b. Installation.
WARNING
Intermediate
crossmember
weighs
approximately 75 lbs (34 kgs).
Attach a
suitable lifting device prior to removal.
Failure to comply may result in damage to
equipment or injury to personnel.
NOTE
•
Steps (1) and (2) require the aid of an assistant.
•
Both intermediate crossmembers are installed
the same way. Front intermediate crossmember
shown.
(1) Position intermediate crossmember (1) on frame rail (2)
with four bolts (3) and self-locking nuts (4).
(2) Tighten four self-locking nuts (4) to 210-225 lb-ft (285-
305 N·m).
c. Follow-On Maintenance.
Install one frame rail (para 13-13).
End of Task.
13-86
